How to grade Pokémon cards, and when it is worth it
Updated November 2, 2026 · prices refreshed November 22, 2026
Short answer: check what the card is worth raw, inspect it closely, and only send it in if a high grade would clearly pay for the cost. Grading itself is simple: you sign up with a grading company, fill in an online form, pack the card carefully and mail it. The hard part is choosing which cards are worth it. This guide covers both, step by step.
What grading actually does
A grading company checks that a card is genuine, gives it a condition grade (usually on a 1 to 10 scale) and seals it in a hard plastic case called a slab. The label shows the card, the grade and a certification number you can look up on the grader’s website.
That does two things for the card’s value. Buyers no longer have to trust a seller’s description of the condition, and top grades are rare enough that collectors pay a premium for them. The flip side: a card that comes back with an ordinary grade is often worth about the same as it was raw, and you have paid to find that out.
Step 1: Check the raw value first
Before anything else, look the card up in the card value checker, or snap a photo with the card scanner. You need the current price of an ungraded copy, because that is what you give up by grading instead of selling it as is.
Most cards do not come close to justifying the cost. Across a whole pack of Prismatic Evolutions, the cards are worth about $4.54 on average, and most of that comes from the occasional hit. Grading fees are charged per card and start well above what a typical pull is worth. A big chase card is a different story: Umbreon ex sells for about $1,130 raw, so a top grade could make a real difference. The most valuable cards list shows which cards are in that range.
To run the actual numbers, use the free grading calculator. Enter the raw price, pick a grading company and service, and add what the graded card sells for. It shows the break-even price and your profit or loss for a 10 and for a 9, after grading fees, shipping and selling fees. Look up what graded copies actually sold for, not asking prices.
Step 2: Pre-grade the card yourself
Graders look at four things. Check each one under a bright light, and tilt the card so scratches catch the light. A magnifying loupe helps a lot.
- Centering. How evenly the picture sits inside the borders, left to right and top to bottom, on the front and the back. For a PSA 10 the front needs to be about 55/45 or better and the back about 75/25 or better.
- Corners. All four should be sharp. Even slight whitening or a soft corner can cost the card a 10.
- Edges. Look for white chips, nicks and rough cuts, especially on the back, where the dark blue border shows every flaw.
- Surface. Scratches, dents, print lines, stains and fingerprints, on the holo foil and on the back.
Be honest with yourself. Modern cards can come out of the pack with off-center printing or print lines, so a fresh pull is not automatically a 10. If a card has visible wear, it will almost never get a grade high enough to pay for grading. For a quick guide to raw condition levels, see our guide to selling Pokémon cards.
Step 3: Know the grading scale
PSA is the best-known grader for Pokémon cards, and its scale is the one most buyers think in:
| PSA grade | Name |
|---|---|
| 10 | Gem Mint |
| 9 | Mint |
| 8 | Near Mint-Mint (NM-MT) |
| 7 | Near Mint (NM) |
| 6 | Excellent-Mint (EX-MT) |
| 5 | Excellent (EX) |
| 4 | Very Good-Excellent (VG-EX) |
| 3 | Very Good (VG) |
| 2 | Good |
| 1.5 | Fair |
| 1 | Poor |
PSA also gives half grades up to 8.5, but there is no 9.5. For modern cards in particular, the price gap between a 9 and a 10 is usually large, so when you estimate whether grading pays, plan for the chance that the card comes back a 9.
Step 4: Choose a grading company
- PSA is the most widely known name for Pokémon slabs. It gives a single grade, with no subgrades.
- CGC is a popular alternative. Its top labels are Pristine 10, for cards that are close to flawless, and Gem Mint 10 just below it.
- Beckett (BGS) is known for subgrades: separate scores for centering, corners, edges and surface. A Black Label goes only to cards that get a 10 in all four.
- Other graders, such as SGC and TAG, also grade Pokémon cards.
The same card in the same grade often sells for different prices depending on the company, so compare recent sales for your card before you choose. Fees, value limits and turnaround times change often. The grading calculator lists the current service levels with the date they were checked, but always confirm on the grader’s own site before you send anything.
Step 5: Submit the card
- Create an account on the grading company’s website and start a new submission.
- Pick a service level. Service levels have a maximum declared value per card. The declared value is what you expect the card to be worth after grading, so a card that could be worth a lot in a 10 may need a higher tier.
- List every card with its set, number and declared value. Declare values honestly; they also matter for insurance.
- Pack each card in a clean, clear penny sleeve, then in a semi-rigid holder (the Card Saver I size is the common choice). PSA asks for semi-rigid holders rather than toploaders.
- Protect the stack. Put the holders between two pieces of stiff cardboard, then in a padded box, with the packing list the grader asks for.
- Ship with tracking and insurance, and keep the receipt.
Step 6: Wait, then check your slabs
Most services take weeks, some take months. When the cards come back, check each slab and look up its certification number on the grader’s website to confirm the record matches. If you plan to sell, recent sales of the same card in the same grade from the same company are the only fair price reference.
When grading is not worth it
- Low-value cards. If the fee and shipping are a big share of the raw price, even a 10 may not cover it.
- Cards with visible wear. Whitened edges, scratches or soft corners make a high grade unlikely.
- Cards you play with or just enjoy. A slab protects a card, but a sleeve and toploader do that for much less.
Grading makes the most sense for valuable cards in excellent condition, for vintage cards where authentication matters to buyers, and for cards you want to keep in a slab no matter what. Nothing here is financial advice: graded prices move, and a grade is never guaranteed.
Start with the numbers
Find the raw price in the card value checker, run it through the grading calculator, and grade only what still looks good after that. Want to know your odds of pulling a card worth grading in the first place? Open some packs in the free simulator, or browse the rest of our guides.
FAQ
How do I get my Pokémon cards graded?
Create an account with a grading company such as PSA, CGC or Beckett, start a submission online, pick a service level based on the card's value, then send the card in a clear penny sleeve inside a semi-rigid holder, well padded and with tracking. The card comes back sealed in a plastic slab with its grade on the label.
Is it worth grading my Pokémon cards?
Only for some cards. Grading pays when the graded card sells for more than the raw card plus the grading fee, shipping both ways and the fees you pay when you sell. That usually means valuable cards in very clean condition. Most cards from a pack are worth too little to cover the cost.
What do the PSA grades mean?
PSA grades from 1 to 10. A 10 is Gem Mint, a 9 is Mint and an 8 is Near Mint-Mint. PSA also gives half grades from 1.5 to 8.5, but there is no 9.5, so the only step above a 9 is a 10.
Can I grade Pokémon cards myself?
You can pre-grade a card yourself by checking its centering, corners, edges and surface, and that is the best way to decide what to send in. An official grade, in a sealed slab with a certification number, only comes from a grading company.